Accessories

Suction Cup Dildo Adapter

This is the files to print the Suction Cup Dildos Adapter. It is made of two parts: one is the above and the under part. With a screw it is clamped on a aluminium scare tube of size 15mm.

../_images/Suction_Cup_Dildos_Adapter-LM42P.jpg

STL file -> Suction Cup Adapter STL

Vac u Lock Adapter

Silicon Mold

../_images/Mold-Vac-U-Lock-Adapter-DIY-LM42P.JPG

Listing Parts

  1. Cup

  2. Centerign Cover

  3. Threaded Stem

  4. Aluminium Vac u Lock Model

Operation Plan

  1. Prepare 220g silicon and 11g hardener

  2. Stir 5min

  3. Put a tape border on the plastic cup

  4. Wait 20min to remove the bubles

  5. Fill in through one of the hole

Mold the Adapter

  1. Use a 50mm long M6 bolt

  2. Prepare 20g cast and 20g hardener

  3. Stir really slowly